Progressiverc PM3-75 User Manual download pdf

OEM Installation of the PM3 Series Power Center

Select a mounting location near the shore power and battery

(batteries).

- Do not mount in an area where the owner may store items, as

this

could reduce the clearance requirements, obstruct ventilation

openings and affect the efficient operation of the converter.

- Do not install close to appliances that are a source of heat or

water

(such as water heaters, furnaces, and under refrigerators). It is not

designed for mounting in wet locations. It must be protected

from direct contact with water.

This equipment employs components that tend to produce arcs or

sparks.

To prevent fire or explosion,

DO NOT INSTALL IN COMPARTMENT CONTAINING

BATTERIES OR FLAMMABLE MATERIALS (LP gas).

FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,

REPLACE ONLY WITH THE SAME TYPE AND RATING FUSE.

The fuse rating which the manufacturer suggests for the output

fuses

will be marked on the unit. Replace only with same type and rat-

ing.

During the manufacturing process, be sure that all converter

openings are protected from debris falling into the unit. This is a

non-warranty item.

NOTE: If the reverse battery protection fuses are blown during

installation, be sure that the battery has been connected properly,

then

replace the fuses with ATC “Littelfuse ” Type 257 with the same

rating as the original.

General Consumer Information

Reverse Battery Protection

This feature prevents permanent damage to the converter from

an incorrect battery connection.

• Automatic Cooling Fan

The fan is variable speed and current controlled.

• Electronic Current Limiting

Automatically shuts down power during overload or short-circuit

conditions.

Automatically returns to normal operation after conditions are cor-

rected.

• DC Fuses

Reverse battery protection fuses; replace only with

ATC “Littelfuse ” Type 257 fuse.

•

Lightweight

- 35 A unit weighs only 9.03 lbs.

- 45 A unit weighs only 11.20 lbs.

- 55 A unit weighs only 11.57 lbs.

- 65 A unit weighs only 14.33 lbs.

- 75 A unit weighs only 14.88 lbs.

1 2 3 4

Summary of Contents

Page 1

OEM Installation of the PM3 Series Power Center Select a mounting location near the shore power and battery (batteries). - Do not mount in an area w

Page 2 - PM3 Series Facts Summary

35 45 55 65 75 Dimensions A: 7.5” (PM3-35) 8.76” (PM3-45, 55) 10.26” (PM3-65, 75) B: 5.53” (PM3-35) 6.79” (PM3-45, 55) 7.52” (PM365

Page 3

Converter Operation Modes All PowerMax power converters are automatic three-stage switching power supplies. The converter senses which mode it needs

Page 4

If the converter output voltage reads in the 13.6 Vdc range and the battery is not charging, check for: - an open inline fuse in the battery wire (if

Related models: PM3-55 | PM3-45 |

Comments to this Manuals

No comments

Progressiverc PM3-75 User Manual

Browse online or download User Manual for Power suppliers Progressiverc PM3-75. ProgressiveRC PM3-75 User Manual

Summary of Contents

Related models: PM3-55 | PM3-45 |

Comments to this Manuals

Related products and manuals for Power suppliers Progressiverc PM3-75